CONTOUR 1500
MODULAR ROAD MARKING MACHINE
UNIVERSAL MARKING WITH VARIOUS MATERIALS
The Kontur 1500 is the pioneer of a class of modular machines, consisting of a basic self-propelled chassis with interchangeable technological modules. The type of module determines the type of marking materials used and the marking application method.
The basic self-propelled chassis consists of a unified operator station, a power unit, transmission and control units, module mounting hardware, and marking units. To ensure the application of glass beads to the marking lines, the chassis is equipped with a glass bead container with vacuum loading capability. A module is a functionally complete unit designed to handle one or a group of similar marking materials. Replaceable modules enable the application of thick- and thin-layer markings using various methods and specialized marking units.
Any module included with the machine can be replaced by another directly by the user. By agreement with the customer, the machine can be equipped with any additional replaceable module.
THE BASIC SELF-PROPELLED CHASSIS IS EQUIPPED WITH:
- a mobile operator’s workstation with two seats, a hard roof, rear-view mirrors, and machine controls;
- road marking control panel;
- power unit control panel;
- hydraulic steering;
- unified elements for connecting consumers of hydraulic oil and compressed air;
- container for glass beads;
- lighting elements, flashing beacons;
- illumination of the marking unit and the operator’s workplace for work at night;
- mechanical sight with hydraulic lifting and lowering;
- adjustable brush for cleaning the road surface in front of the marking unit;
- automation and control units;
- piston compressor;
- two fire extinguishers.
OPTIONAL CHASSIS EQUIPMENT:
- obstacle avoidance direction sign (700 mm) on a rotating bracket;
- cluster sign of direction of obstacle avoidance (1050×1050 mm, cluster 200 mm);
- screw compressor;
- rear platform for auxiliary worker and traffic cones;
- a set of equipment for applying preliminary markings;
- any chassis color range according to RAL.
CONTOUR 1500 X
The Kontur 1500 X is designed for thick-layer markings using cold-applied plastics and is based on the Kontur 1500 base chassis with a cold-applied plastic module. The marking unit produces smooth and textured lines 100, 120, 150, 200, 240, 250, or 300 mm wide. Applicator sizes are specified when ordering.
COLD PLASTIC MODULE “COLD PLASTIC APPLICATION EQUIPMENT “MX 1500”
BASIC EQUIPMENT OF THE MODULE:
- cold plastic container;
- hardener container;
- container for washing liquid;
- cold plastic dosing system;
- hardener dosing system;
- mobile marking unit for applying two lines;
- a mixer in a container for cold plastic with a hydraulic drive;
- one set of applicators for applying smooth lines (size is specified when ordering, additional applicators are ordered separately).
OPTIONAL MODULE EQUIPMENT:
- additional applicators for smooth and structured lines (width 100, 120, 150, 200, 240,
250, 300 mm).
MAIN TECHNICAL CHARACTERISTICS*
| Characteristic | CONTOUR 1500 X |
|---|---|
| Engine type | diesel |
| Engine power, kW | 74 |
| Engine power, hp | 100 |
| Engine capacity, cm3 | 3800 |
| Engine environmental safety class | EU Stage IIIA (TIER 3) |
| Compressor | piston |
| Optional compressor**** | screw |
| Maximum working road slope, % | 20 |
| Maximum road slope, % | 30 |
| Transport speed, km/h | 12 |
| Capacity for glass beads, l | 330 |
| Capacity for glass beads, kg | 530 |
| Remote control screen diagonal, inches | 5,7 |
| Number of pre-installed programs | up to 24 |
| Type of marking material (main / optional) | cold plastic |
| Maximum marking speed, km/h (main material / optional) | 8 / 10 |
| Amount of marking material, kg | 1200 |
| Amount of hardener, l | 50 |
| Amount of washing liquid, l | 50 |
| Fuel tank capacity, l | 150 |
| Oil tank capacity, l | 100 |
| Quantity of the second marking material, kg | |
| Number of lines applied simultaneously | 2 |
| Number of guns (applicators, extruding heads) | 2 |
| Width of applied lines, double, mm | 100, 120, 150 |
| Width of applied lines, single, mm | 100, 120, 150, 200, 240 |
| Overall dimensions of the machine (Length x Width x Height), mm: | |
| — in working position | 8000х2100х2600 |
| — in transport position | 5500х2100х2600 |
| Dry weight, kg | 3900 |
| Curb weight, kg | 4200 |
| Gross weight, kg | 6100 |
* The data provided is for reference only and may differ from the actual data.
**** Optional equipment, to be discussed when ordering.
CONTOUR 1500 K
The Kontur 1500 K is designed for airless thin-layer marking with solvent-based paints (enamels) with a minimum dry content of 70%. The machine consists of a Kontur 1500 base chassis with a paint module. The paint module is referred to as the “MK 1500” paint application equipment.
PAINT MODULE “MK 1500 PAINT APPLICATION EQUIPMENT”
BASIC EQUIPMENT OF THE MODULE:
- mobile marking unit with two pairs of marking and sprinkling guns;
- paint container;
- hydraulically driven mixer;
- high pressure paint pump;
- coarse filter on the paint supply line to the pump;
- fine paint filter in the high-pressure line;
- manual paint gun, 10 m hose;
- paint flow sensor;
- A system for collecting and transmitting statistics via GSM with reference to GPS/GLONASS coordinates.
OPTIONAL MODULE EQUIPMENT:
- Hand-held spray gun extension, 50 cm;
- a set of equipment for marking airport runways and taxiways (parameters are agreed with the customer);
- Cold spray plastic application equipment set for two lines, 100:2, external mixing.
MAIN TECHNICAL CHARACTERISTICS*
| Characteristic | CONTOUR 1500 K |
|---|---|
| Engine type | diesel |
| Engine power, kW | 74 |
| Engine power, hp | 100 |
| Engine capacity, cm3 | 3800 |
| Engine environmental safety class | EU Stage IIIA (TIER 3) |
| Compressor | piston |
| Optional compressor**** | screw |
| Maximum working road slope, % | 20 |
| Maximum road slope, % | 30 |
| Transport speed, km/h | 12 |
| Capacity for glass beads, l | 330 |
| Capacity for glass beads, kg | 530 |
| Remote control screen diagonal, inches | 5,7 |
| Number of pre-installed programs | up to 24 |
| Type of marking material (main / optional) | paint / spray plastic 100:2 (external mixing) |
| Maximum marking speed, km/h (main material / optional) | 8 / 10 |
| Amount of marking material, kg | 1360 |
| Amount of hardener, l | |
| Amount of washing liquid, l | |
| Fuel tank capacity, l | 150 |
| Oil tank capacity, l | 100 |
| Quantity of the second marking material, kg | |
| Number of lines applied simultaneously | 2 |
| Number of guns (applicators, extruding heads) | 2 |
| Width of applied lines, double, mm | up to 200 |
| Width of applied lines, single, mm | up to 300 |
| Overall dimensions of the machine (Length x Width x Height), mm: | |
| — in working position | 8000х2000х2600 |
| — in transport position | 5500х1350х2600 |
| Dry weight, kg | 4300 |
| Curb weight, kg | 4600 |
| Gross weight, kg | 6500 |
* The data provided is for reference only and may differ from the actual data.
**** Optional equipment, to be discussed when ordering.
CONTOUR 1500 T
The Kontur 1500 T is designed for applying thick-layer thermoplastic markings and consists of a Kontur 1500 base chassis with a thermoplastic module.
THERMOPLASTIC MODULE “Thermoplastic Application Equipment “MT 1500”
BASIC EQUIPMENT OF THE MODULE:
- insulated container for thermoplastic;
- mixer in a container for thermoplastic, with hydraulic drive;
- thermal oil circulation system;
- system for maintaining a set temperature of thermal oil and thermoplastic;
- liquid fuel burner;
- mesh filter in the filling window of the thermoplastic tank;
- marking block for applying smooth lines up to 500 mm wide (10×50 mm);
- two guns for applying glass beads;
- hand gas torch;
- non-contact thermometer.
ADDITIONAL MODULE EQUIPMENT:
- tray for draining thermoplastic from the container;
MAIN TECHNICAL CHARACTERISTICS*
| Characteristic | CONTOUR 1500 T |
|---|---|
| Engine type | diesel |
| Engine power, kW | 74 |
| Engine power, hp | 100 |
| Engine capacity, cm3 | 3800 |
| Engine environmental safety class | EU Stage IIIA (TIER 3) |
| Compressor | piston |
| Optional compressor**** | screw |
| Maximum working road slope, % | 20 |
| Maximum road slope, % | 30 |
| Transport speed, km/h | 12 |
| Capacity for glass beads, l | 330 |
| Capacity for glass beads, kg | 530 |
| Remote control screen diagonal, inches | 5,7 |
| Number of pre-installed programs | up to 24 |
| Type of marking material (main / optional) |
thermoplastic |
| Maximum marking speed, km/h (main material / optional) |
8 / 12 |
| Amount of marking material, kg | 1460 |
| Amount of hardener, l | |
| Amount of washing liquid, l | |
| Fuel tank capacity, l | 150 |
| Oil tank capacity, l | 100 |
| Quantity of the second marking material, kg | |
| Number of lines applied simultaneously | |
| Number of guns (applicators, extruding heads) | |
| Width of applied lines, double, mm | up to 150 |
| Width of applied lines, single, mm | up to 500 |
| Overall dimensions of the machine (Length x Width x Height), mm: | |
| — in working position | 8000х2400х2600 |
| — in transport position | 5500х2400х2600 |
| Dry weight, kg | 4380 |
| Curb weight, kg | 4600 |
| Gross weight, kg | 6600 |
*The data provided is for reference only and may differ from the actual data.
**** Optional equipment, to be discussed when ordering