Road marking materials
Enamel AK-511 “SPRINTER”
Sprinter enamels are designed for horizontal road markings on public roads and industrial facilities with asphalt and cement concrete surfaces (in white, yellow, orange, red, blue, and green), as well as for demarcating road markings by masking (painting) (in black). These products are manufactured under a quality management system certified to ISO 9001.
Enamel AK-514 “STANDARD”
“Standard” enamels are available in white and yellow. They are designed for horizontal roadway markings on public roads. The products are manufactured under a quality management system certified to ISO 9001.
Cold-applied plastic B-AK-52-T “STRELA” (for manual application)
Cold-applied plastic B-AK-52-T “Strela” (hereinafter referred to as “CP “Strela” manual”) is a high-viscosity material, complete with a polymerization initiator (hardener) and, upon customer request, reflective glass beads. It does not contain organic solvents. It is designed for producing thick-layer horizontal road markings with high functional durability. CP “Strela” manual is available in white, yellow, red, blue, green, and black. The product is manufactured under a quality management system certified to ISO 9001.
Cold-applied plastic B-AK-53-T “STRELA” (for machine application)
Cold-applied plastic B-AK-53-T “Strela” (hereinafter referred to as HP “Strela” machine-applied) is a high-viscosity material, equipped with a polymerization initiator (hardener) and, upon customer request, retroreflective glass beads. It does not contain organic solvents. It is designed for producing thick-layer horizontal roadway markings (pedestrian crossings, intersections, stopping lines, as well as edge and center lines on highways and motorways) with high functional durability. Horizontal markings made with HP “Strela” machine-applied are characterized by high wear resistance, good weather resistance and UV resistance, good adhesion to asphalt concrete and cement concrete, and excellent day and night visibility. HP “Strela” machine-applied is available in white, yellow, red, green, and blue. The products are manufactured under a quality management system certified to ISO 9001.
Thermoplastic “EQUATOR”
Thermoplastic “Equator” (hereinafter referred to as “TP “Equator” PL) is a composite material (a loose mixture) based on a polyester binder, containing pigments, fillers, plasticizers, and functional additives. It contains microglass beads (fraction 100-600 µm) in quantities ranging from 10% to 20%. It is intended for application to public roads with asphalt concrete pavement. There are 6 types of thermoplastics TP “Equator” PL: for regions with a moderate climate (yellow, white, red colors) – P-PL-502-200, for structural markings (white) – P-PL-503-200 (“structure”), for intensive urban traffic (white and yellow colors) – P-PL-504-200 (“city”), for regions with a cold climate (white and yellow colors) – P-PL-505-200 (“north”), for regions with a warm climate (white and yellow colors) – P-PL-506-200 (“south”), for regions with a hot climate (white and yellow colors) – P-PL-507-200 (“tropical”). The products are manufactured under the control of a quality management system certified for compliance with the requirements of ISO 9001.
Thermoplastic “STANDARD” P-PL-521-200 (without glass beads)
Thermoplastic P-PL-521-200 “Standard” (hereinafter referred to as TP “Standard” PL) is a composite material (a loose mixture) based on a polyester binder, containing pigments, fillers, plasticizers, and functional additives. It does not contain glass microspheres.
Thermoplastic “STANDARD” P-NP-523-200
Thermoplastic P-NP-523-200 “Standard” (hereinafter referred to as TP “Standard” NP) is a composite material (a loose mixture) based on a petroleum polymer binder, containing pigments, fillers, plasticizers, and functional additives. It is intended for application to the pavement of public roads with asphalt concrete pavement. It contains microglass beads (fraction 100-600 µm) in quantities ranging from 10% to 20%. TP “Standard” NP, based on petroleum polymer resin, has increased abrasion resistance. It is suitable for use in regions with moderate, cold, warm, and hot climates. The product is manufactured under a quality management system certified to ISO 9001.
