CONTOUR 700 TP
ROAD MARKING MACHINE WITH THERMOPLASTIC PLASTICS
MARKING WITH THERMOPLASTICS
The Kontur 700 TP machine is designed for applying thick-layer horizontal road markings on asphalt and concrete roads using thermoplastics and reflective glass beads.
The marking unit can apply lines from 5 to 50 cm wide in various combinations. A valve opening control system allows for the application of solid and noise lines, as well as lines with periodically variable profiles and patterns. The machine’s hydraulic drive allows for smooth adjustment of the Kontur 700TP’s speed during marking, and an automatic liquid-fuel burner control system maintains the desired plastic temperature. All mechanisms are controlled directly from the operator’s station.«Контур 700ТП» в процессе нанесения разметки, поддержание заданной температуры пластика обеспечивает система автоматического регулирования жидкотопливной горелкой. Управление всеми механизмами осуществляется непосредственно с места оператора.
The extruder, brush, and operator station can be mounted on either the left or right side of the machine. Transport to the work site is accomplished using a low-deck trailer with a minimum load capacity of 5 tons.
BASIC EQUIPMENT OF THE CAR:
- 50 cm marking unit, smooth lines;
- two glass bead sprinkling guns;
- remote control for applying markings;
- a pedal that duplicates the “Start” button on the marking control panel;
- hydraulically driven mixer in a plastic container;
- flashing beacons on the roof of the car;
- searchlight for illuminating the marking block;
- obstacle avoidance direction sign (700 mm) on a rotating bracket;
- hydraulically driven brush.
ADDITIONAL EQUIPMENT OF THE MACHINE:
- DL marking block for applying smooth or structured lines up to 500 mm wide (10×50 mm);
- tray for draining thermoplastic from the container;
- a remote button that duplicates the “Start” button on the marking control panel;
- a set of equipment for applying preliminary markings.
MAIN TECHNICAL CHARACTERISTICS
| Characteristic | CONTOUR 700 TP |
|---|---|
| Engine type | diesel |
| Engine power, kW | 74 |
| Engine power, hp | 100 |
| Engine capacity, cm3 | 3800 |
| Engine environmental safety class | EU Stage IIIA (TIER 3) |
| Compressor | piston |
| Maximum working road slope, % | 20 |
| Maximum road slope, % | 30 |
| Transport speed, km/h | 12 |
| Capacity for glass beads, l | 120 |
| Capacity for glass beads, kg | 190 |
| Remote control screen diagonal, inches | 5,7 |
| Number of pre-installed programs | up to 24 |
| Type of marking material (main / optional) | thermoplastic |
| Maximum marking speed, km/h (main material / optional) | 5 |
| Amount of marking material, kg | 700 |
| Amount of hardener, l | |
| Amount of washing liquid, l | |
| Fuel tank capacity, l | 90 |
| Oil tank capacity, l | 115 |
| Quantity of the second marking material, kg | |
| Number of lines applied simultaneously | 2 |
| Number of guns (applicators, extruding heads) | 2 |
| Width of applied lines, double, mm | up to 150 |
| Width of applied lines, single, mm | up to 500, multiples of 50 |
| Overall dimensions of the machine (Length x Width x Height), mm: | |
| — in working position | 8600х2300х2700 |
| — in transport position | 5500х2300х2400 |
| Dry weight, kg | 3200 |
| Curb weight, kg | 3400 |
| Gross weight, kg | 4300 |