SHMELEK TP

ROAD MARKING MACHINE WITH THERMOPLASTIC PLASTICS

MARKING WITH THERMOPLASTICS

The machine is designed for horizontal road marking with modern thermoplastics (pedestrian crossings, stop lines, road dividing lines, arrows, etc.), with the ability to simultaneously sprinkle reflective glass beads.

The markings can be applied to dry, clean asphalt concrete and asphalt road surfaces in the form of a smooth line at ambient temperatures ranging from +5°C to +30°C and relative humidity no more than 85%. The machine is equipped with heated, replaceable marking pads of varying widths, allowing for markings from 0.1 to 0.5 m wide. Changing the pads requires no tools.

The spreading unit can be adjusted to suit the width of a specific marking block. Melting a small amount of plastic is possible within the machine. The machine is moved by the operator’s own power during operation.

MAIN TECHNICAL CHARACTERISTICS

Characteristic SHMELEK TP
Marking material thermoplastic
Method of applying markings drawing box
Type of marking smooth
Marking application speed, km/h 1 — 3
Amount of applied material, kg/m2 up to 7.2
Width of the applied marking line*, mm 150, 400
Number of replaceable blocks in the basic configuration 1*
Capacity of glass bead bins, l (kg) 10 (15)
Capacity of material bins 55 (110)
Diameter of used containers for plastic, mm
Glass bead application method gravitational
Adjustment of the width of glass beads sprinkling, mm 100 — 400
Regulation of glass bead consumption yes, replaceable clutch
Marking thickness, mm 2…5
Overall dimensions (Length x Width x Height), mm:
— in working order 2100х1300х1060
— in transport condition 1350х800х1060
Weight of the device without the marking unit and replaceable parts, kg 110**
Weight of marking blocks (according to standard sizes), kg 16; 28
Overall dimensions of trays, LxWxH, mm (100; 120; 150; 200; 300; 400) х (230 х 160)
Number of staff, people 2

* The size is specified when ordering

** without gas cylinder