CONTOUR 30
ROAD MARKING MACHINE
THIN-LAYER PAINT MARKING
Designed for applying longitudinal and transverse horizontal road markings using modern single-component paints (enamels) using the airless method. The machine is controlled by an operator walking behind it. The compact size of the Kontur 30 allows for work within city limits without interfering with traffic.
Solid and dashed line marking is performed manually using a remotely operated gun button. When using stencils, the gun can be easily removed from the bracket. The machine’s airless marking system allows for the use of high-viscosity paints and produces smooth line edges.
The compressor allows the machine to be used as a source of compressed air for technological operations, such as preparing cold plastic (mixing with hardener), homogenizing paint in containers, and so on. Careful selection of components ensures reliability and a long service life. The machine utilizes components from Graco, SMC, Festo, Fini, and Kamber.
BASIC EQUIPMENT OF THE CAR:
- fine paint filter;
- Automatic paint pressure maintenance system;
- paint hose 10 m;
- air preparation system, receiver;
- nipple for connecting external compressed air consumers;
- spare parts kit.
ADDITIONAL EQUIPMENT OF THE MACHINE:
- 50cm extension for hand-held paint gun.
MAIN TECHNICAL CHARACTERISTICS
| Characteristic | CONTOUR 30 |
|---|---|
| Engine type | petrol |
| Engine power, kW | 4,8 |
| Engine power, hp | 6,5 |
| Engine capacity, cm3 | 205 |
| Engine environmental safety class | |
| Compressor | piston |
| Maximum working road slope, % | 20 |
| Maximum road slope, % | |
| Transport speed, km/h | 5 |
| Capacity for glass beads, l | |
| Capacity for glass beads, kg | |
| Remote control screen diagonal, inches | |
| Number of pre-installed programs | |
| Type of marking material | dye |
| Maximum marking speed, km/h | 5 |
| Amount of marking material, kg | 30 |
| Amount of hardener, l | |
| Amount of washing liquid, l | |
| Fuel tank capacity, l | 3,6 |
| Oil tank capacity, l | |
| Number of lines applied simultaneously | 1 |
| Number of guns (applicators, extruding heads) | 1 |
| Width of applied lines, double, mm | |
| Width of applied lines, single, mm | до 250 |
| Overall dimensions of the machine (Length x Width x Height), mm: | |
| — in working position | 2000х1000х1100 |
| — in transport position | 1500х700х100 |
| Dry weight, kg | |
| Curb weight, kg | 154 |
| Gross weight, kg |