CONTOUR 50
ROAD MARKING MACHINE
THIN-LAYER PAINT MARKING
The Kontur 50 machine is designed for applying longitudinal and transverse horizontal road markings with enamels and paints using an airless method with the simultaneous sprinkling of reflective glass beads.
The compact size of the Kontur 50 allows for work within city limits without disrupting traffic. The machine’s airless application method allows for the use of high-viscosity, high-solid paints.
The control panel enables marking of 10 line types in various modes: manual, semi-automatic, and automatic. Reliability and long service life. Careful selection of components guarantees reliability and a long service life. The machine uses components from Graco, Danfoss, Festo, Fini, and Kamber.
BASIC EQUIPMENT OF THE CAR:
- lifting sight;
- technological control panel with an hour meter;
- fine paint filter;
- flashing beacon on a retractable rod;
- manual marking gun;
- lighting of the marking block.
ADDITIONAL EQUIPMENT OF THE MACHINE:
- LED side lights and direction indicators;
- removable capacity of 45 liters;
- 50cm extension for hand-held paint gun.
MAIN TECHNICAL CHARACTERISTICS
| Characteristic | CONTOUR 50 |
|---|---|
| Engine type | petrol |
| Engine power, kW | 9,6 |
| Engine power, hp | 13 |
| Engine capacity, cm3 | 420 |
| Engine environmental safety class | |
| Compressor | piston |
| Maximum working road slope, % | 20 |
| Maximum road slope, % | 30 |
| Transport speed, km/h | 8 |
| Capacity for glass beads, l | 17 |
| Capacity for glass beads, kg | 28 |
| Remote control screen diagonal, inches | |
| Number of pre-installed programs | up to 7 |
| Type of marking material | dye |
| Maximum marking speed, km/h | 5 |
| Amount of marking material, kg | 30 |
| Amount of hardener, l | |
| Amount of washing liquid, l | |
| Fuel tank capacity, l | 6,6 |
| Oil tank capacity, l | 18 |
| Number of lines applied simultaneously | 2 |
| Number of guns (applicators, extruding heads) | 2 |
| Width of applied lines, double, mm | up to 150 |
| Width of applied lines, single, mm | up to 250 |
| Overall dimensions of the machine (Length x Width x Height), mm: | |
| — in working position | 3000х1200х1300 |
| — in transport position | 2200х1200х1300 |
| Dry weight, kg | 410 |
| Curb weight, kg | 500 |
| Gross weight, kg | 545 |