CONTOUR 400
MODULAR ROAD MARKING MACHINE
UNIVERSAL MARKING WITH VARIOUS MATERIALS
This is a machine with interchangeable process modules. The installed modules determine the type of marking materials used and the marking application method.
The machine’s modules can be replaced directly by the customer. By agreement with the customer, the machine can be equipped with any additional replaceable module.
THE BASIC SELF-PROPELLED CHASSIS IS EQUIPPED WITH:
- a mobile operator’s workstation with two seats, a hard roof, rear-view mirrors, and machine controls;
- road marking control panel;
- hydraulic steering;
- unified elements for connecting consumers of hydraulic oil and compressed air;
- capacity of glass beads;
- lighting elements, flashing beacons;
- illumination of the marking unit and the operator’s workplace for work at night;
- mechanical sight with manual raising and lowering;
- automation and control units;
- piston compressor;
- two fire extinguishers.
OPTIONAL CHASSIS EQUIPMENT:
- rear platform for auxiliary worker and traffic cones;
- hydromarker.
CONTOUR 400 X
Designed for thick-layer marking with cold-applied plastics, this unit is based on the Kontur 400 base chassis with a cold-applied plastic module. The marking unit produces single smooth and textured lines 100, 120, 150, 200, 240, 250, or 300 mm wide. Applicator sizes are specified when ordering.
COLD PLASTIC MODULE “COLD PLASTIC APPLICATION EQUIPMENT “MX 400”
BASIC EQUIPMENT OF THE MODULE:
- cold plastic container;
- hardener capacity;
- capacity of washing liquid;
- cold plastic dosing system;
- hardener dosing system;
- marking block for drawing one line;
- mixer in a cold plastic container with hydraulic drive;
- one applicator for applying a smooth line (size is specified when ordering, additional applicators are ordered separately).
OPTIONAL MODULE EQUIPMENT:
- additional applicators for smooth and structured lines (width 100, 120, 150, 200, 240, 250, 300 mm).
MAIN TECHNICAL CHARACTERISTICS*
| Characteristic | CONTOUR 400 X |
|---|---|
| Engine type | diesel |
| Engine power, kW | 25-StageIII 36-Stage V |
| Engine power, hp | 34-StageIII 49-Stage V |
| Engine capacity, cm3 | 1500-StageIII 1700-Stage V |
| Engine environmental safety class | EU Stage IIIA (TIER 3)** |
| Compressor | piston |
| Optional compressor**** | |
| Maximum working road slope, % | 20*** |
| Maximum road slope, % | 30 |
| Transport speed, km/h | 20 |
| Capacity for glass beads, l | 75 |
| Capacity for glass beads, kg | 120 |
| Remote control screen diagonal, inches | 5,7 |
| Number of pre-installed programs | до 24 |
| Type of marking material (main / optional) | cold plastic |
| Maximum marking speed, km/h (main material / optional) | 5 |
| Amount of marking material, kg | 380 |
| Amount of hardener, l | 11 |
| Amount of washing liquid, l | 11 |
| Fuel tank capacity, l | 42 |
| Oil tank capacity, l | 64 |
| Quantity of the second marking material, kg | |
| Number of lines applied simultaneously | 1 |
| Number of guns (applicators, extruding heads) | 1 |
| Width of applied lines, double, mm | |
| Width of applied lines, single, mm | 100, 120, 150, 200, 300 |
| Overall dimensions of the machine (Length x Width x Height), mm: | |
| — in working position | 6420х1600х2280 |
| — in transport position | 3330х1600х2100 |
| Dry weight, kg | 1700 |
| Curb weight, kg | 1900 |
| Gross weight, kg | 2400 |
* The data provided is for reference only and may differ from the actual data
** EU Stage V on request
*** Up to 30% gradeability on request
**** Optional equipment, to be discussed when ordering
CONTOUR 400 K
Designed for airless application of thin-layer markings using solvent-based paints (enamels) with a minimum solids content of 70% and a viscosity of up to 150 seconds on the Ford No. 4 scale.
The machine consists of a Contour 400 base chassis with a paint module.
PAINT MODULE “MK 400 PAINT APPLICATION EQUIPMENT”
BASIC EQUIPMENT OF THE MODULE:
- mobile marking unit with two pairs of marking and sprinkling guns;
- paint container;
- hydraulically driven mixer;
- high pressure paint pump;
- fine paint filter in the high-pressure line;
- manual paint gun, 10 m hose;
- paint flow sensor;
- A system for collecting and transmitting statistics via GSM with reference to GPS/GLONASS coordinates.
OPTIONAL MODULE EQUIPMENT:
- Hand-held spray gun extension, 50 cm;
- Single line cold spray plastic coating equipment set, 100:2, external mixing.
MAIN TECHNICAL CHARACTERISTICS*
| Characteristic | CONTOUR 400 K |
|---|---|
| Engine type | diesel |
| Engine power, kW | 25-StageIII 36-Stage V |
| Engine power, hp | 34-StageIII 49-Stage V |
| Engine capacity, cm3 | 1500-StageIII 1700-Stage V |
| Engine environmental safety class | EU Stage IIIA (TIER 3)** |
| Compressor | piston |
| Optional compressor**** | |
| Maximum working road slope, % | 20*** |
| Maximum road slope, % | 30 |
| Transport speed, km/h | 20 |
| Capacity for glass beads, l | 75 |
| Capacity for glass beads, kg | 120 |
| Remote control screen diagonal, inches | 5,7 |
| Number of pre-installed programs | up to 24 |
| Type of marking material (main / optional) | paint / spray plastic 100:2 (external mixing) |
| Maximum marking speed, km/h (main material / optional) | 8 |
| Amount of marking material, kg | 380 |
| Amount of hardener, l | 11 |
| Amount of washing liquid, l | |
| Fuel tank capacity, l | 42 |
| Oil tank capacity, l | 64 |
| Quantity of the second marking material, kg | |
| Number of lines applied simultaneously | 2 |
| Number of guns (applicators, extruding heads) | 2 |
| Width of applied lines, double, mm | up to 150 |
| Width of applied lines, single, mm | up to 300 |
| Overall dimensions of the machine (Length x Width x Height), mm: | |
| — in working position | 6420х1600х2280 |
| — in transport position | 3330х1600х2100 |
| Dry weight, kg | 1700 |
| Curb weight, kg | 1900 |
| Gross weight, kg | 2400 |
* The data provided is for reference only and may differ from the actual data
** EU Stage V on request
*** Up to 30% gradeability on request
**** Optional equipment, to be discussed when ordering
CONTOUR 400 T
It is designed for applying thick-layer markings with thermoplastic and consists of a Kontur 400 base chassis with a thermoplastic module.
THERMOPLASTIC MODULE “Thermoplastic Application Equipment “MT 400”
BASIC EQUIPMENT OF THE MODULE:
- insulated container for thermoplastic;
- stirrer in a thermoplastic container, with hydraulic drive;
- thermal oil circulation system;
- system for maintaining a set temperature of thermal oil and thermoplastic;
- liquid fuel burner;
- mesh filter in the filling window of the thermoplastic tank;
- marking block for applying smooth lines using the extrusion method up to 300 mm wide;
- glass bead gun;
- hand gas torch;
- non-contact thermometer.
OPTIONAL MODULE EQUIPMENT:
- marking block for applying markings using a drawing box (instead of the basic marking block).
MAIN TECHNICAL CHARACTERISTICS*
| Characteristic | CONTOUR 400 T |
|---|---|
| Engine type | diesel |
| Engine power, kW | 25-StageIII 36-Stage V |
| Engine power, hp | 34-StageIII 49-Stage V |
| Engine capacity, cm3 | 1500-StageIII 1700-Stage V |
| Engine environmental safety class | EU Stage IIIA (TIER 3)** |
| Compressor | piston |
| Optional compressor**** | |
| Maximum working road slope, % | 20*** |
| Maximum road slope, % | 30 |
| Transport speed, km/h | 20 |
| Capacity for glass beads, l | 75 |
| Capacity for glass beads, kg | 120 |
| Remote control screen diagonal, inches | 5,7 |
| Number of pre-installed programs | up to 24 |
| Type of marking material (main / optional) | thermoplastic |
| Maximum marking speed, km/h (main material / optional) | 5 |
| Amount of marking material, kg | 400 |
| Amount of hardener, l | |
| Amount of washing liquid, l | |
| Fuel tank capacity, l | 42 |
| Oil tank capacity, l | 64 |
| Quantity of the second marking material, kg | |
| Number of lines applied simultaneously | 1 |
| Number of guns (applicators, extruding heads) | 1 |
| Width of applied lines, double, mm | up to 100 |
| Width of applied lines, single, mm | up to 300, multiples of 50 |
| Overall dimensions of the machine (Length x Width x Height), mm: | |
| — in working position | 6420х1600х2280 |
| — in transport position | 3330х1600х2100 |
| Dry weight, kg | 2100 |
| Curb weight, kg | 2300 |
| Gross weight, kg | 2800 |
*The data provided is for reference only and may differ from the actual data.
** By order of EU Stage V
*** On request, a slope of up to 30% can be overcome
**** Optional equipment, to be discussed when ordering